Product Details
Custom 5kwh,10kwh,15kwh Floor mounted stand energy storage battery. Module design can be combined flexibly. It is perfect to provide backup power for energy storage system in household.
A 5kWh floor mounted solar battery is typically considered for essential backup loads and solar self-consumption. The 10kWh and 15kWh versions extend the energy window for larger loads or longer runtime. Select the battery from usable energy, average and surge load, inverter limits, PV recharge and the required reserve state of charge—not from nameplate kWh alone.
| Option | Rated capacity | Dimensions / weight | Planning fit |
|---|---|---|---|
| 5kWh | 51.2 V, 100 Ah | 760 × 480 × 215 mm / 50 kg | Essential circuits, shorter backup targets and modest evening solar use. |
| 10kWh | 51.2 V, 200 Ah | 775 × 480 × 245 mm / 88 kg | Longer backup or a wider household self-consumption window. |
| 15kWh | 51.2 V, 300 Ah | 920 × 485 × 255 mm / 120 kg | Higher daily energy use, longer runtime or planned load growth. |
The table is a quick comparison of the listed models. Confirm the final datasheet, usable capacity, continuous current, accessories and warranty conditions for the exact quotation.
Start with usable battery energy (kWh) ÷ average load (kW). For example, if the approved usable energy is 4.5kWh and the average protected load is 0.5kW, the baseline is about 9 hours. Then allow for inverter loss, reserve SOC, temperature, battery aging and motor starting loads. A refrigerator, pump or air conditioner can require much more starting power than its average consumption suggests.
Nominal voltage is only the first check. Confirm the inverter's battery voltage window, charge and discharge current, CAN or RS485 protocol, cable pinout, firmware, low-SOC behavior and approved battery model. A matching connector or brand logo does not prove communication compatibility. Compare the solar inverter range and send the exact inverter model before ordering.
Verify floor loading, cabinet dimensions, service clearance, cable route, protection devices, ventilation, ambient temperature and access for delivery. Confirm whether future batteries may be paralleled and whether mixed ages, capacities or firmware versions are allowed.
Use the solar battery RFQ checklist, compare the home energy storage range, or contact the project team with the details above.
Calculate usable energy from the protected loads and required hours, then check inverter power, surge current and PV recharge. Keep a reserve for low-SOC limits, aging and weather instead of sizing to the exact nameplate capacity.
Expansion may be possible, but the quoted model, BMS, firmware, cable set and inverter must support the planned parallel configuration. Confirm the maximum quantity and rules before the first installation.
Confirm whether the quote covers the battery, base or cabinet, communication and power cables, breakers or fuses, inverter, monitoring, freight, tax, installation and commissioning. Comparing the same supply boundary prevents misleading price comparisons.
| Model | TD-01-5KWH | TD-02-10KWH | TD-03-15KWH |
| Energy Capacity (kWh) | 5kWh | 10kWh | 15kWh |
| Nominal Voltage (V) | 51.2 V | 51.2 V | 51.2 V |
| Rated Capacity (Ah) | 100 Ah | 200 Ah | 300 Ah |
| Dimensions (mm) | 760*480*215 | 775*480*245 | 920*485*255 |
| Weight (kg) | 50 kg | 88 kg | 120 kg |
| Maximum Continuous Charge Current | 200A | 200A | 200A |
| Maximum Continuous Discharge Current | 200A | 200A | 200A |
| Cycle Times | ＞6000 | ＞6000 | ＞6000 |
| Cell Series Numbers(pcs) | 16S1P | 16S1P | 16S1P |
| Charge Cut-off Voltage(V) | 58.4 | 58.4 | 58.4 |
| Discharge Cut-off Voltage(V) | 43.2 | 43.2 | 43.2 |
| Comms Ports | RS232/RS485/CAN | RS232/RS485/CAN | RS232/RS485/CAN |
| Battery Parallel Interface | Up to 15 units in parallel | Up to 15 units in parallel | Up to 15 units in parallel |
| Warranty | 10 Years | 10 Years | 10 Years |
| Certifications | CE, UL, MSDS, IEC, UN38.3, ISO | CE, UL, MSDS, IEC, UN38.3, ISO | CE, UL, MSDS, IEC, UN38.3, ISO |
| Charge Current (Std / Max) | 0.2 C / 1 C @ 25 °C | 0.2 C / 1 C @ 25 °C | 0.2 C / 1 C @ 25 °C |
| Discharge Current (Std / Max) | 0.5 C / 0.6 C @ 25 °C | 0.5 C / 0.6 C @ 25 °C | 0.5 C / 0.6 C @ 25 °C |
| Operating Temp (Charge / Discharge) | 0 – 60 °C / –20 – 60 °C | 0 – 60 °C / –20 – 60 °C | 0 – 60 °C / –20 – 60 °C |
| High Inverter Compatibility | Home Automation |
| ≥15 Years Life Span | New Grade A LFP cells |
| WIFI-Communication | Cell time ≥6500 Cycles |
| CANbus Standard Connection | IP65 Ingress Rated |
| Smart BMS System | Intelligent Monitoring System |
| Certification: CE, IEC, UL, UN38.3, and ROHS | Lower Maintenance and Safe |
The energy storage battery supports RS485 and CAN communication interfaces, offering strong compatibility and can be connected with most mainstream inverters on the market, ensuring high practicality. If you are concerned about compatibility with your home inverter, please contact us. Our engineers will provide practical advice and customized services.
ELECNO is a professional manufacturer of lithium LiFePO4 batteries with over 20 years’ experience. We provide the solar energy storage solutions, mainly focusing on home solar energy system, container battery energy storage system, industrial and commercial energy storage system.
We offer OEM/ODM services for overseas ESS distributors and factories, allowing you to customize our stackable LiFePO4 battery solutions to align with your brand.
All energy storage batteries have undergone rigorous testing and obtained certification(CE, IEC, UL, UN38.3, and ROHS).
For additional specifications, please get in touch with us. We are committed to providing comprehensive service